金属扁环填料

由于结构上的改变，特别适用于液—液两相的相对流动，减少了分散相液滴群在此处的聚结，而结构对称均匀的内弯弧形筋片形式，对流体流动的均匀性有较好的影响，促进了液滴群的分散—汇合—再分散的循环过程，有效的降低了填料层的轴向返混，提高了液—液两相的传质效率。所以此种填料用于液—液传质的萃取过程，取得了很好的技术经济效果。其性能明显优于鲍尔环和矩鞍填料，轴向混合小、处理能力大，其传质效果可提高20%以上。
MSMR直接替代清华大学的扁环填料(SMR)
Size: (MSMR-1,MSMR-2,MSMR-3)φ16mm、φ25mm、φ38mm、φ50mm、φ76mm
NC Metal Super mini Ring (NC-MSMR)
As the structural changes, MSMR is especially suitable for the application of liquid - liquid two-phase relative flow, reducing the dispersed droplets coalescence. The symmetrical uniform structure within the curved arc of the form of bars, this design enables the uniformity of fluid flow, better droplets dispersion cycle dispersed -convergence - re-dispersed, effectively reduces the back mixing of axial direction, and improves liquid – liquid two-phase mass transfer efficiency. Therefore, by applying such packing in liquid - liquid extraction process of mass transfer achieved a very good technical and economic effect. It outperforms pall ring packing and saddle ring
packing, smaller axial mixing, larger processing capacity, the mass transfer effects can be increased by 20%.
NC-MSMR Direct replacement of the widely used Super mini ring(SMR)
Size: (MSMR-1,MSMR-2,MSMR-3)φ16mm、φ25mm、φ38mm、φ50mm、φ76mm