矿用监控及数据传输阻燃信号电缆的详细介绍我厂是矿用监控及数据传输阻燃信号电缆生产厂家,我厂致力于矿用监控及数据传输阻燃信号电缆生产,井下矿用监控及数据传输阻燃信号电缆研究,通过矿用监控及数据传输阻燃信号电缆的研究不断提高产品的质量,提升您产品在市场中的竞争力.矿用监控及数据传输阻燃电缆:用途主要用于。

、适用范围 本产品适用于交流额定电压300/500V或直流1000V及以下电子计算机网络及自动化控制系统的信号传输、抗干 扰性能要求较高的检测装置和仪器仪表的连接。 2.电缆敷设安装允许弯曲半径:非铠装层电缆应不小于电缆外径的6倍;铠装或屏蔽层结构电缆应不小于电 缆外径的12倍;屏蔽层结构的软电缆应不小于电缆外径的6倍。
Basic cable: any filled and unfilled cable with a single or double sheath structure.
4、最小弯曲半径:非铠装电缆:阻燃型为电缆外径的6倍,铠装型电缆:为电缆外径的20倍矿用通信电缆型号:MHYVMHYAVMHYA32MHJYV瓦丝监控探头线MHYV(1×22×21×45×2)×7/0.28矿用通信电缆用于平巷斜巷及机电硐室MHJYV4/0.28铜线+3/0.28钢线1×22×2矿用。

KVVRP铜芯聚氯乙烯绝缘聚氯乙烯护套编织屏蔽控制软电缆。KVVP-22铜芯聚氯乙烯绝缘聚氯乙烯护套铜丝编织屏蔽钢带铠装KVVP2-22铜芯聚氯乙烯绝缘聚氯乙烯护套铜带屏蔽钢带铠装。--铜芯、实芯聚烯烃绝缘、铝塑综合护套市内通信电缆。
变频器的保护功能动作时,继电器的常闭触点控制接触器电路,会使接触器断开,从而切断变频器的主电路电源。不应以主电路的通断来进行变频器的运行、停止操作。需用控制面板上的运行键(RUN)和停止键(STOP)或用控制电路端子FWD(REV)来操作。变频器输出端子(U、V、W)**经热继电器再接至三相电动机上,当旋转方向与设定方向不一致时,要调换U、V、W三相中的任意两相。变频器的输出端子不要连接到电力电容器或浪涌吸收器上。
Flame retardant signal cable for coal mine: MHYVR MHYBV MHYV32 MHYVR MHYVP MHYBV MHYVR32
从那时起评估和寻找PVC料的替代物遂成为人们争论的焦点。早在1986年欧洲首先发现燃烧产物中含有的多溴二苯醚,四溴代双苯并二恶烷及四溴代双苯并呋喃等属于致癌物质。直至2001年英国又接连发现五溴二苯醚,十溴二苯醚在野生猎鹰蛋内的生物积累高出家养猎鹰蛋400倍。
KYJV22ZR-KYJV22铜芯交联聚乙烯绝缘聚氯乙烯护套钢带铠装控制电力电缆敷设在室内、电缆沟、管道、直埋等能承受较大机械外力等固定场合。KYJV32ZR-KYJV32铜芯交联聚乙烯绝缘聚氯乙烯护套细钢丝铠装控制电力电缆敷设在室内、电缆沟、管道、竖井等能承受较大机械拉力等固定场合。

Characteristics of inverter cable: 1. Low effective capacitance; 2. Good fire resistance, can be used in dangerous areas
适用于室内、管道及一般工业环境。使用时,屏蔽层一端接地。铠装双绞屏蔽型电缆ASTP-120Ω(forRS485&CAN)onepair18AWG,电缆外径12.3mm左右。可用于干扰严重、鼠害频繁以及有防雷、防爆要求的场所。
最高传输频率分别为30MHz与100MHz。本产品适用于市内、近郊和局部地区的通信线路。导电芯线采用标称直径为0.4、0.5、0.6、0.7、0.8、0.9mm的软铜线。绝缘单线绞合成对后采用心式(10对、20对)或单位式(30对及以上)绞合成缆芯,每个基本单位的子单位扎带颜色相同,各基本单位扎带颜色按全色谱要求排列。
“装修隐蔽工程很重要”,几乎所有装修过的人都听说过这句话。但是对于大多数人来说,这九个字不够是一句口号而已,并未落实到实践中去——少数人选择落实,但也不过是把装修预算向隐蔽工程稍微倾斜而已。但是很明显,仅仅这样做还是不够。低质量的建材、低水平的工艺,依然能在用户的眼皮子底下顺利交工。究其根本,是用户没有利用好验收这道门槛——我们今天要说的,就是装修电路改造的验收。电路改造验收应该分两次进行——第一次验收第一次电路验收,时间在水电改造刚刚结束,墙地面施工工人入场之前。
Manufacturing technology of frequency converter cable: in the production process of special cable for frequency converter motor, the core extrusion process and cable forming process are the most critical processes. The quality of the insulation core in the extrusion process of the insulation core will directly affect the electrical energy of the cable.
ZR-VV-阻燃,硬动力电缆,不易弯曲,适用于固定敷设。 VV-不阻燃,硬动力电缆,不易弯曲,适用于固定敷设。 ZR-VV-阻燃,硬动力电缆,不易弯曲,适用于固定敷设。安防工程、监控工程、弱电系统工程、综合布线、银行监控工程、网络工程、消防工程、远程三表抄送、楼宇防盗监控、门禁可视对讲等专用音视频信号电线电缆。

IA-DJVVP IA-DJYVP IA-DJYJVP 本安型、编织总屏蔽(铜丝或镀锡丝)。 IA-DJVVP2 IA-DJYVP2 IA-DJYJVP2 本安型、铜塑复合膜总屏蔽。 IA-DJVVP3 IA-DJYVP3 IA-DJYJVP3 本安型、铝塑复合膜总屏蔽。
Purpose: the self-supporting non-filled cable is suitable for the urban and township telecommunication lines of local telecommunication network, and also for the special network lines connecting to the public network. It is economical and practical to use the same outer protective layer for hoisting line and cable. The mechanical and electrical properties of the cable remain unchanged under conditions of 30~C - 60~C. Structure: wire: annealed bare copper wire, copper wire diameter is 0. 4, 0. 50, 0. 60, 0. 70, 0. 80, 0. 90 mm. Insulating material: high density polyethylene or ethylene-propylene copolymer. The color of the insulated wire is in accordance with the full chromatographic standard. Pair of insulated wires: two different colored insulated wires are twisted in pairs according to different pitch and are identified by a specified chromatographic combination. Core structure: with 25 pairs as the basic unit, more than 25 pairs of cables are assembled according to the unit, each unit is wired with the unit of specified chromatogram to identify different units. 100 pairs or more of cables plus 1% of the reserve pair. Core tape: wrap with a polygrease film tape. Shielding: the two sides are overlapped with or without corrugated metal strip, beyond the cable core of the longitudinal capsule. The plastic film coated on the surface of the shielding belt and the bonding sheath of the protective layer: black low density polyethylene. Hoisting line: the hoisting line is 7 strands of galvanized steel strand, nominal outside diameter is 6. 3 and 4 mm. The tensile strength of two types of 75mm is not less than 3000kg and 1800kg respectively. The suspension wire is coated with thermoplastic paint to prevent the steel wire from corrosion. Identification and length marking
