MHYV(PUYV):聚乙烯绝缘聚氯乙烯护套煤矿用信号电缆用于矿场作普通信号传输,适用于固定敷设。MHYVRP:聚乙烯绝缘铜丝编织屏蔽聚氯乙烯护套煤矿用信号电缆,用于电场干扰较大的场所作信号传输,电缆较柔软。

JYPV-3铜芯聚乙烯绝缘聚氯乙烯护套铜丝编织总屏蔽电子计算机电缆。JYP2V-1铜芯聚乙烯绝缘聚氯乙烯护套铜/塑复合膜分屏蔽电子计算机电缆。JYP2V-2铜芯聚乙烯绝缘聚氯乙烯护套铜/塑复合膜分屏蔽及总屏蔽电子计算机电缆。
规格:截面0.50.751.01.52.54615mm2及以下2.5mm2以上A类1/0.801/1.131/1.131/1.381/1.781/2.251/2.76聚氯乙烯护氟塑料护套聚氯乙烯护氟塑料护套B类19/0.119/0.219/0.219/。
国标GB4706.1-1992/1998规定的电线负载电流值(部分)1平方铜芯线允许长期负载电流为:6A---8A1.5平方铜芯线允许长期负载电流为:8A---15A2.5平方铜芯线允许长期负载电流为:16A---25A4平方铜芯线允许长期负载电流为:25A---32A6平方铜芯线允许长期负载电流为。

Frequency converter cable symmetry design a: special cable for 1.8/3 kv and below frequency conversion motor, and symmetric 3 + 1 core and 4 core cable can only be used for the main power input cable, but it is best to use the symmetric structure of cable. Inverter and variable frequency motor and cable must adopt symmetrical cable structure, symmetrical cable structure with three core and 3 + 3 core two kinds, 3 + 3 core cable structure is a small four to three core insulation wire core in the fourth core (neutral) is decomposed into three smaller insulation wire core section, the three big three symmetrical string cable core cable, special cable for 6/10 kv frequency conversion motor, the cable structure and 6/10 kv power cable, ordinary ordinary power cable is three insulation wire core adopts copper tape screened after cabling.
看图要点电路组成电子电路图都是由各种元器件图形符号和文字符号组成的,如电阻、电容、电感、晶体管、集成电路等元器件。要看懂一个电气设备的电子电路图,首先要了解图中使用了哪些电子元器件,这些元器件的结构、功能、特性是什么。电路图中用得最多的是晶体管和集成电路,因此要了解晶体管的输入、输出特性以及工作在放大区、截止区和饱和区的条件,集成电路芯片的引脚及功能等。还应了解一些敏感器件(如热敏器件、湿敏器件、气敏器件、光敏二极管)的功能、特性。
执行标准:GB/T13879.93YD/T,适用范围:本产品适用于市内通信用。HYA铜芯实心聚烯烃绝缘铝塑粘结综合护套市内通信电缆管道。HYAC铜芯实心聚烯烃绝缘铝塑粘结综合护套自承式市内通信电缆架空。
重型橡套电缆YCYCWYCW-J(钢丝加强型)中型橡套电缆YZYZWYZ-J电焊机电缆YHYHF防水电缆JHS采掘机电缆UGFUGFP10KV及以下野外用电缆YHDYZWYCW 布电线额定电压450/750V及以下聚氯乙烯绝缘电缆,执行标准为GB。
全塑市话电缆主要电气性能:1.直流电阻:20℃,0.4≤148?;/km0.5≤95.0?;/km0.6≤65.8?;/km0.8≤36.6?;/km2.绝缘电气强度:导体之间1min1kv不击穿导体与屏蔽1min3kv不击穿3.绝缘电阻:每根芯线与其余线芯接地,充气电缆大于10000MΩ.km,填。
同轴电缆从用途上分可分为基带同轴电缆和宽带同轴电缆(即网络同轴电缆和视频同轴电缆)。同轴电缆分50Ω基带电缆和75Ω宽带电缆两类。基带电缆又分细同轴电缆和粗同轴电缆。基带电缆仅仅用于数字传输,数据率可达10Mbps。

1、产品名称:自承式控制电缆KVVRC行车控制电缆2、型号:KVVRC、KVVPRC、KVVP2RC、KVVRPRC3、产品说明:型号名称KVVRC自承式铜芯聚氯乙烯绝缘聚氯乙烯护套行车控制电缆KVVPRC自承式铜芯聚氯乙烯绝缘聚氯乙烯护套编织屏蔽行车专用电缆KVVP2RC自承式铜芯聚氯乙烯绝缘聚氯。
阻燃电缆还应符合IEC332-3标准的技术条件型号产品名称电压V芯数截面mm2主要适用范围KVV阻铜芯聚氯乙烯绝缘聚氯乙烯护套kvv电缆450/7504-370.75-10敷设在室内,电缆沟、管道等固定场合KVV22铜芯聚氯乙烯绝缘聚氯乙烯护套钢带铠装kvv22电缆450/7。
布线总原则其实定位的时候就已经决定了布线的走向,布线的时候还是有很多讲究,材料上的把握,弯管之类的,一般采用线管暗埋的方式。我们水电施工首先都依赖于这一张图纸,按照图上规划好的施工,才能确保房子电路安全,当然发现设计上有问题要及时纠正。家装电路布线家装布线图—家装电路布线的原则第一:强弱电的间距要在750px-1250px。第二:强弱电更不能同穿一根管内。第三:管内导线总截面面积要小于保护管截面面积的40%,比如20管内最多穿4根2.5平方的线。
为了提高电缆的质量,我们选择高电性能绝缘材料生产,例如1.8/3kv变频电机专用电缆,采用10kV交联绝缘材料,6/10kv变频电机专用电缆采用35kv交联绝缘材料,导体屏蔽、绝缘屏蔽和绝缘材料均采用了进口材料。

Converter cable shielding structure design: frequency conversion motor 1.8/3 kv and below special cable shielding generally adopt total shielding, frequency conversion motor of 6/10 kv dedicated cable shielding consists of split phase mask and the total shielding, shielding can generally be split phase adopts copper tape screened or copper wire copper strip composite shielding.
Armoured communication cable armoring cable type: HYA53, HYAT53, HYA23 HYAT23, HYV22, HYA22 (rat, buried) armoring communication cable USES: armoured communication cable mechanical protective layer can be appended to the structure of the cable, with the mechanical strength of the cable, antierosion capability, is vulnerable to mechanical and designed and vulnerable to erosion area telephone cable. Any kind of laying can be adopted, which is more suitable for direct buried laying in rock area. Armored communication cable structure: 1. Basic cable: any filled and unfilled cable with single sheath or double sheath structure. 2. Armored communication cable mechanical protection layer: type 53 adopts 0.15mm thick corrugated steel belt, which is longitudinal wrapped on the basic cable and overlapped on both sides. The surface of the steel belt is coated with plastic to prevent corrosion and water intrusion. The type 23,22 has similar performance with double steel band wrapping. 3. Armored communication cable sheath: black high-molecular weight low-density polyurethane or polyurethane sheath. Sheath thickness may depend on the basic cable outer diameter. 5. The marking contents of armored communication cables include: wire diameter, number of wire pairs, cable model, length, manufacturer name and year of manufacture. 6. Armored communication cable electrical characteristics: the cable meets all the electrical requirements of the basic cable. 6. Cable length: mechanically protected cable is made according to the length of the corresponding basic cable
ZR-HYA53:铜芯实心聚烯烃绝缘挡潮层聚乙烯护套钢塑带铠装阻燃聚乙烯护套市内通信电缆。ZR-HYAT53:铜芯实心聚烯烃绝缘填充式挡潮层聚乙烯护套钢塑带铠装阻燃聚乙烯护套市内通信电缆。ZR-HYA22:铜芯实心聚烯烃绝缘挡潮层聚乙烯护套钢带铠装阻燃聚氯乙烯护套市内通信电缆。
