是一种无铅的，并含有二硫化钼和防腐蚀涂料的表面光泽涂层,这种热固化涂层材料可以防止腐蚀、磨损,，它是一种的低摩擦系数的涂料，可以延长使用寿命，操作时超过-195°C到+ 260°C，耐负载100000 psi。符合：AS5272E Type III - MIL-PRF-46010H - Formerly MIL-L-46010 Type III；
Sandstrom099热固化以后，他不受大气、摩擦腐蚀、溶剂、油、脱脂剂的影响
Sandstrom #099 Dry Film Lubricant is a paint-like coating
containing molybdenum disulfide and corrosion inhibiting
pigments. This Heat Curing material prevents corrosion,
galling, seizing, and fretting. It is a low-friction coating which
exhibits long wear life when operated at -320 0 F to +500 0 F
under loads exceeding 100,000 psi.
#099 should be applied where maximum wear life and
corrosion protection from a dry film lubricant are required.
once Sandstrom #099 has been heat cured, it is virtually
unaffected by atmospheric and fretting corrosion, solvents,
acids, oils, degreasers, and is not resoftened again at
elevated temperatures.
