4pcg 破碎机

手机版链接：https://m.trustexporter.com/cz426330.htm
1、能耗低、电机功率是同类产品的50-70%。
2、无需筛分机组，物料直接入机，减少设备投资。
3、本机只对超标物料进行破碎，合格物料直接落下，不增加过粉量。
4、减少土建投资、粗破、细破-机完成。
5、使用费用低、齿板可使用3000-12000个小时。
6、使用稳定、故障率低，本机采用齿辊破碎，故无需反击板、方刚、锤头、衬板、簏板等易损件，只需 简单更换齿板。
7、齿辊采用子母槽差速设计，从而对物料的水份没有任何要求，且不粘不堵。
8、全时监控轴承振动频率及温度，轴承全时自动注油冷却。
9、噪音和振动相对其它系列成倍降低。
10、价格仅是同类进口设备的40-60%。
1, low energy consumption, the electrical power is 50-70% similar products.
2, no screening unit, the material directly into the machine, reducing investment in equipment.
3, this machine only to be broken excessive materials, qualified materials, direct drop, not increase over the amount of powder.
4, reduction of construction investment, thick broken, thin broken - machine to complete.
5, the use of low-cost, tooth plate can be used 3000-12000 hours.
6, using a stable, failure rate is low, the machine used Roll Crusher, so no need to fight back board, Vincent Fang, hammer, linings, Toshi boards wearing parts, you simply replace the tooth plate.
7 Roll differential use of Picture-tank design, and thus there is no water on the material requirements, and the non-stick is not blocked.
8, full-time monitoring of bearing vibration frequency and temperature, bearing a full-time auto-oiling cooling.
9, noise and vibration compared to other series of double reduction.
10, the price of similar imported equipment is only 40-60%.