手机版链接:https://m.trustexporter.com/cz763476.htm
Standard disc plough
It consists of steel disc of 60 to 90 cm diameter, set at a certain angle to the direction of travel. Each disc revolves on a stub axle in a thrust bearing, carried at the lower end of a strong stand beam.
The angle of the disc to the vertical and to the furrow wall is adjustable. In action, the disc cuts the soil, breaks it and pushes it sideways. There is little inversion of furrow slice as well as little burying of weeds and trashes.
The disc plough may be mounted type or trailed type. In mounted disc plough, the side thrust is taken by the wheels of the tractor. Sometimes a rear wheel is fitted to take side thrust of the plough to some extent.
In trailed type, side thrust is taken by the furrow wheel of the plough. Disc is made of heat treated steel of 5 mm to 10 mm thickness. The edge of the disc is well sharpened to cut the soil. The amount of concavity varies with the diameter of the disc. The approximate values being 8cm for 60cm diameter disc and 16 cm for 95 cm diameter. A few important terms connected with disc plough is explained below:
Disc: It is a circular, concave revolving steel plate used for cutting and inverting the soil.