供应阿尔法助焊剂ALPHA 3355VF

发布日期 :2010-07-17 18:08 编号:478342 发布IP:120.65.252.74
供货厂家
时予电子科技有限公司
报价
420.00元/个
联系人
龚丽(先生)
电话
0755-330713871
手机
13421322521
询价邮件
GONGLI118@SOHU.COM
区域
深圳焊接切割
地址
深圳宝安宝通大厦
让卖家联系我
详细介绍
手机版链接:https://m.trustexporter.com/cz478342.htm
相关参数: Water Soluble Flux Organo-Flux.3355-VF Flux Description Organo-Flux 3355-VF flux is a VOC-free modification of ORGANO-FLUX 3355-11 water soluble organic acid flux, used in the soldering of printed circuits and electronic hardware. This formulation produces exceptional solder wetting to a wide variety of metallic surfaces and is unsurpassed in water solubility for thorough removal of post soldering residues. Application ORGANO-FLUX 3355-VF flux can be wave, spray or dip applied. Flux applicators and reservoir should be plastic or titanium only. Flux coated surfaces should be preheated to provide optimum wicking and solder joint formation. The degree of preheat is dependent on many variables, such as conveyor speed, type of components and substrates. Entering the solder wave with a topside temperature in the 210oF range is typical. Control: When using recirculation type flux applicators, the specific gravity of the flux should be checked periodically with a hydrometer and restored to specified value by the addition of DI water. In time, debris and contaminants will accumulate in the flux. For consistent soldering performance, dispose of spent flux in accordance with Federal, State and local laws, rules and regulations periodically. After emptying used flux, the reservoir should be thoroughly cleaned with DI water. Refill the reservoir with fresh flux and allow a few minutes to stabilize before resuming solder operation. Removal: After soldering, ORGANO-FLUX residues must be removed. Removal can be accomplished in multi-zone conveyorized in-line spray systems, automated batch spray systems (dishwashers) or multi-stage batch tank cleaning. Multiple zone in-line systems equipped with quality tap or conditioned water, an effective air knife and drying capacity can produce MIL-P-28809 ionic cleanliness levels. A LONCOTERGE.saponifier or LONCO 2051 series Neutralizer product is recommended for improving cleanliness levels in batch and in-line systems with limited cleaning capabilities. Incorporating a saponifie
我们的其他产品
您可能喜欢
阿尔法变频器阿尔法阿尔法遥控器无锡阿尔法变频器阿尔法变频器价格阿尔法变频器厂家阿尔法锡膏厂家
 
相关阿尔法产品