cast iron T-slot worktable

手机版链接：https://m.trustexporter.com/cz3787336.htm
T-slot workbench is fitter workers used to debug equipment, assembly equipment, maintenance equipment foundation work platform, T-slot workbench is a kind of industrial measuring tool, mainly used for fixation artifacts.The hardness of high strength cast iron HT200-300 working surface hardness is HB170-240, after two manual processing (600-700 degrees or artificial annealing natural aging 2-3 years) using the product accuracy stability, wear-resisting performance is good.
T型槽工作台使用注意事项
The usages of T-slot worktable and warnings
T型槽平台的在生产过程中，会产生一部分理论重量的偏差，要注意的是铸铁平板的偏差是不是影响的铸铁平板使用。一般铸铁平板的设计应该考虑到铸造误差和机械加工的误差，铸铁平板的重量误差一般不得超过10%，超过10%时，我们要对铸铁平板的质量做进一步的鉴定才可以确定此铸铁平板是否可以投入使用。

T-slot platform in the process of production, will produce a part of the theory of weight deviation, note whether the cast iron flat cast iron plate on the impact of the deviation is used.General cast iron plate error should be considered in the design of the casting and machining error, the weight of the cast iron plate error generally should not exceed 10%, more than 10%, we are going to do about the quality of the cast iron plate further appraisal to determine whether the cast iron plate can be put into use.
T型槽工作台的生产过程中会出现一些产品缺陷，只要采用正确的方法可以进行工艺弥补，铸铁平板工作面的缺陷是不可以忽视的重要部位，铸铁平板主要的缺陷包括：气孔、沙孔、夹沙、缩松等.所以对铸铁平板的缺陷做修复时要严格按工艺要求处理。

T slot platform will appear some defects in the process of production,as long as adopting right methods can process for,cast iron platform working surface defection can not ignore the important position.
Cast iron plate main defects include: porosity, sand, sand hole, shrinkage, etc. So to repair the defect of cast iron plate to strictly according to the technological requirements.