XKM系列绝缘穿刺线夹

手机版链接：https://m.trustexporter.com/cz1916933.htm
一、性能与特点 Function & Features
XKM 系列穿刺线夹主要适用于架空绝缘导线的接续、分支连接和接地保护，适用电压等级为10kV和1kV及以下，其主要性能和特点：
1. 安装简便。安装时无需剥去导线的绝缘层，只要按规定位置在线夹中放入主线和支线，用简 扳 手套均匀拧断力矩螺母即可：
2. 接触电阻小，线夹温升低。特制力矩螺栓确保怛定的穿刺压力，使线夹与导线达到良好的电气接触而不过分损伤导线，保证架空绝缘导线的正常使用寿命；
3. 结构密封、绝缘性高。线夹内部采用绝缘导热油脂填充，安装后整个导体形成全封闭结， 提 高构了绝缘强度和安全性；
4. 线夹适用范围广。可适用于铜铝绝缘导线、异径导红的支接、等径导线的对接，并适用铜 铝 绝于缘导线的过渡连接。
XKM series insulation piercing connector is mainly used for wire branching The applicable voltage is 10kV, 1kVand lessmore than 1kV. It has the following function and features:
1. Simple installation. The insulated layer of lead needn’t be stripped. Put the mainline and branch line into connector correctly and screw the moment nut off with a box spanner.
2. Small contact resistance and low temperature rising . The specially-made moment bolt guarantees constant piercing pressure which enable the connector to get a good electric contact without any excessive conductor damage, and guarantee the normal performance life of circuitry.
3. Sealed stunture and high surability. The internal adopts whole sealing structure and is filled with insulating heat conducting grease, which improves insulating strength and security.
4. Wide application range . It is applicable to branch connection of copper and aluminum conductor, hetero-dia metric conductor, and butt joint of isodiametric conductor. It is also applicable to transition branch connection of copper and aluminum insulated lead.
二、应用 Application
A：高层楼宇竖井电缆分支
1. 用传统方法安装并固定好主干线电缆
2. 在需做分支的部位剥开主缆外护套0.6米(切勿破坏相线绝缘层)
3. 选与电表箱间距相符的分支电缆(不超过3米)并剥离两端端头护套
4. 纵向依次安装分支器(分支器间距≥10cm)
1.Installing and fixing main cable in traditional way.
2. Stripping outer