缠绕纱 Winding roving

手机版链接：https://m.trustexporter.com/cz612248.htm
缠绕纱 Winding roving
特点：
硅烷型浸润剂处理张力均匀，具有良好的成带性具有良好的耐磨性，毛丝少纤维线密度稳定，单丝强度高与不饱和聚酯树脂有良好的相容性，快速、彻底的浸透
average filament tensile force and good integrity have excellent filament endurable for abrading and low fuzz filament density steady and great filament tensile force easy wet out and high impregnating endued good physical and chemical properties for final composite products.
应用:由“E”玻璃制成的连续纤维单股粗纱，适合于缠绕、挤拉成型工艺。适用于不饱和聚酯树脂。
Applying for filament winding and pultrusion.Compatible with epoxy resin, ethylene resin , and unsaturated polyester resin
包装：合股无捻粗纱，每个纱团用聚乙烯塑料袋进行包装，然后放入托盘或纸箱，每个托盘可码放48个或64个纱团，每个纱团重量17-20kg。可根据用户要求增加纱团重量。托盘堆高不大于2层，纸箱堆高不大于5层。
订货时请注明: ◎产品代号 ◎粗纱Tex值 ◎订货总重量 ◎包装方式 ◎如有特殊要求请注明
each direct roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet. Each pallet can stack 48 or 64 rolls .each roll weight is 15-18kg. It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers.
please remark followings in purchasing order: ◎ product code ◎roving TEX  ◎quantity ◎packaging requirement  ◎special needs can meet according to customer requirements.
贮存：产品应堆放于干燥凉爽处，如若不用，请勿打开包装物或扎紧包装口，以免受潮。
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.