鞋材立体浆 Water based plastisol ink

Product name Water based plastisol ink
State Paste
Packing 25KG/drum for white, 20KG/drum for clear
Storage 6 months in cool place
Application Suitable for cotton, polyester etc
Features 1. High elasticity
2. High fastness
3. detecting passed, no PVC, no heavy metal, no NPEOs
Mix proportion Light: White plastisol ink 70-80% + Clear plastisol ink 20-30% + pigment ?% + fixing agent 2%
Deep: White plastisol ink 20-30% + Clear plastisol ink 70-80% + pigment ?% + fixing agent 2%
Printing process 1. Mixing with white paste, clear paste, pigment , fixing agent and stirring them evenly.
2. Printing for 3-4 times (3-4 scrapes per time).
3. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃
4. Finish.
Attentions
品名 免烘全能水性热固油墨 （XY-2010AB）
外观 糊状
包装 白胶浆25KG/桶，透明浆20KG/桶
贮存期 常温下6个月
应用 棉、棉/涤混纺、涤纶、深浅色布、尼龙布，防水尼龙布，泳衣布，牛仔布，皮鞋，鞋材等
卖点 1.常温以固化：省人工，省电，省设备投资成本，降低普通热固油墨过热末熟透的风险。
2.因为常温固化所以适合所有布类和皮革。
3. 防升华性能比普通热固油墨优5倍。
4.可用水性色浆(色种)自由调色(大大降低存货成本)。
5. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求
调配比例 印浅色：白胶浆70-80% + 透明浆20-30% + 固化剂2% + 色种？%
印深色：白胶浆20-30% + 透明浆70-80% + 固化剂2% + 色种？%
工艺流程 1. 将白胶浆，透明浆，色种搅拌匀印3-4次
2. 24-48小时自然干燥，或150-180度焙烘1-3分钟
注意事项