模具清洗剂

手机版链接：https://m.trustexporter.com/cz1381170.htm
模具清洗剂
模具清洗剂能快速有效清洗模具表面的油脂,污渍,色粉和塑胶残留污渍,挥发性好,不留痕迹；尤其适合去除模具上成型时留下的塑胶树脂渣,模具防锈膜及污渍,电器接点电路板的清洗等。本品环保无任何有害物质,桂花香型。
用法：使用前摇匀本品从相距喷件25厘米处轻按喷头喷射即可。
注意：本品属于第四代石油类制品,请勿靠近火源,避免强阳光长久直射,贮存在50C以下阴凉干燥处,长时间贮放一层不能超过8箱,如不慎射入眼睛,请用清水清洗。
第三方质量控制：SGS RoHS PAHs MSDS SVHC 16P 卤素 TBBP-A认证
名称：模具清洗剂
包装：24瓶/箱
含量：500ML
450ML两种容量
500ML单瓶重量：370克
450ML单瓶重量：350克
500ML纸箱尺寸：41.5X28X22.5cm
450ML纸箱尺寸：41X27.5X21cm
This product can effectively clean mold surface grease, stains, toner and plastic residual stains, volatile well, leaving no trace; especially for the removal of mold molding plastic resin residue left, die rust-proof membrane and stains, electrical contact circuit board cleaning. This product is environmentally friendly without any harmful substances, the osmanthus flower.
Usage: shake well before using this product from being sprayed 25 cm at the touch nozzle jet.
Note: This product is the fourth generation of petroleum products, please keep away the fire, avoid long sun point-blank, stored in the 50C following a cool and dry place, Long time storage layer can not be more than 8 boxes, such as accidentally into eyes, please rinse with clear water.
Name: mold cleaning agent
Packing: 24 bottle / box
Content: 500ML
450ML two kinds of capacity
500ML single bottle weight: 370 gram
450ML single bottle weight: 350 gram
Carton size: 41.5X28X22.5cm 500ML
Carton size: 41X27.5X21cm 450ML




联系人：李先生
手机号码：15363016517
E—mail：985344836@QQ.COM
地址：广东省佛山市顺德区伦教工业区