物性表
物性纠错
物理性能测试条件测试方法测试结果单位密度 / 比重23°CISO11831.20g/cm³表观密度2ISO600.64g/cm³熔体质量流动速率300°C/1.2kgISO113310g/10min熔体体积流动速率300°C/1.2kgISO113310.0cm3/10min收缩率TDISO25770.60to0.80%MDISO25770.60to0.80%TD:2.00mm3ISO294-40.70%MD:2.00mm3ISO294-40.65%吸水率饱和,23°CISO620.30%平衡,23°C,50%RHISO620.12%机械性能测试条件测试方法测试结果单位拉伸模量23°CISO527-2/12400Mpa拉伸应力屈服,23°CISO527-2/5066.0Mpa断裂,23°CISO527-2/5070.0Mpa拉伸应变屈服,23°CISO527-2/506.1%断裂,23°CISO527-2/50130%标称拉伸断裂应变23°CISO527-2/50>50%TensileCreepModulus1hrISO899-12200Mpa拉伸蠕变模量1000hrISO899-11900Mpa弯曲模量423°CISO1782400Mpa弯曲应力43.5%Strain,23°CISO17875.0Mpa23°CISO17899.0Mpa弯曲应变523°CISO1787.0%光学性能测试条件测试方法测试结果单位RefractiveIndex11
ISO4891.586
透射率1000µmISO13468-289.0%2000µmISO13468-289.0%3000µmISO13468-288.0%4000µmISO13468-287.0%热性能测试条件测试方法测试结果单位线形热膨胀系数TD：23to55°CISO11359-26.5E-05cm/cm/°C导热系数923°CISO83020.20W/m/KRTIElec1.5mmUL746125°CRTIImp1.5mmUL746115°CRTIStr1.5mmUL746125°C热变形温度0.45MPa,未退火ISO75-2/B136°C1.8MPa,未退火ISO75-2/A124°C玻璃转化温度8
ISO11357-2144°C维卡软化温度--ISO306/B50143°C--ISO306/B120144°CBallPressureTest135°CIEC60695-10-2Pass
线形热膨胀系数MD：23到55°CISO11359-26.5E-05cm/cm/°C电气性能测试条件测试方法测试结果单位表面电阻率
IEC600931E+16ohms体积电阻率23°CIEC600931E+16ohms·cm介电强度23°C,1.00mmIEC60243-134KV/mm相对电容率23°C,100HzIEC602503.10
23°C,1MHzIEC602503.00
耗散因数23°C,100HzIEC602508E-04
23°C,1MHzIEC602509E-03
漏电起痕指数解决方案AIEC60112225V解决方案BIEC60112125V薄膜测试条件测试方法测试结果单位GasPermeationOxygen:23°C,100.0µmISO2556650cm³/m²/bar/24hrWaterVaporTransmissionRate23°C,85%RH,100µmISO15106-115g/m²/24hrGasPermeationCarbonDioxide:23°C,25.4µmISO255616900cm³/m²/bar/24hrCarbonDioxide:23°C,100.0µmISO25563800cm³/m²/bar/24hrNitrogen:23°C,25.4µmISO2556510cm³/m²/bar/24hrNitrogen:23°C,100.0µmISO2556120cm³/m²/bar/24hrOxygen:23°C,25.4µmISO25562760cm³/m²/bar/24hr冲击性能测试条件测试方法测试结果单位简支梁缺口冲击强度6-30°C,完全断裂ISO739114kJ/m²23°C,局部断裂ISO739170kJ/m²简支梁无缺口冲击强度-60°CISO179/1eUNoBreak
-30°CISO179/1eUNoBreak
23°CISO179/1eUNoBreak
悬壁梁缺口冲击强度7-30°C,完全断裂ISO739112kJ/m²23°C,局部断裂ISO739165kJ/m²多轴向仪器化冲击能量-30°CISO6603-265.0J23°CISO6603-260.0J多轴向仪器化冲击力峰值-30°CISO6603-26300N23°CISO6603-25400N硬度测试条件测试方法测试结果单位球压硬度
ISO2039-1115Mpa可燃性测试条件测试方法测试结果单位热灯丝点火温度0.75mmIEC60695-2-13875°C1.5mmIEC60695-2-13875°C3.0mmIEC60695-2-13900°C极限氧指数10
ISO4589-236%ApplicationofFlamefromSmallBurner-MethodKandF2.00mmDIN53438-1,-3K1,F1
燃烧速率-US-FMVSS>1.00mmISO3795passed
FlashIgnitionTemperature
ASTMD1929460°CGlowWireTest1.50mmEDFHN60E.02750°C3.00mmEDFHN60E.02750°C针焰试验MethodF:1.50mmIEC60695-11-52.0minUL阻燃等级0.75mm,CLUL94V-2
1.5mmUL94V-2
3.0mmUL94V-0
灼热丝易燃指数0.75mmIEC60695-2-12900°C1.5mmIEC60695-2-12960°C3.0mmIEC60695-2-12960°C针焰试验MethodF:2.00mmIEC60695-11-52.0minMethodF:3.00mmIEC60695-11-52.0minMethodK:1.50mmIEC60695-11-51.0minMethodK:2.00mmIEC60695-11-52.0minMethodK:3.00mmIEC60695-11-52.0minSelfIgnitionTemperature
ASTMD1929530°C补充信息测试条件测试方法测试结果单位ElectrolyticalCorrosion23°CIEC60426A1
ISOShortname
ISO7391-PC,MFLR,(,,)-09-9
