Technical Parameters
* 工作幅宽Working width: 700-1600mm
* 工作气压Working air pressure: 0.6-0.9MPa
* 总功率Total power: 18。5kw
结构特点Structural Features
* 导纸方式采用风力吸附,保持瓦楞楞型的稳定。
* This machine adopts the wind adsorption to keep the stability of flutes.
* 由风机通过真空箱将瓦楞纸吸附在中瓦楞辊180度范围内形成负压区,来完成瓦楞的轧制。
* The corrugated paper is adsorbed to the middle corrugated roller to form a negative pressure zone of 180°and then to finish the rolling of corrugation through the vacuum box by fan.
* 下瓦楞辊吸风槽宽不超过2.6mm,可减免单面瓦楞纸板条纹痕迹。
* The width of suction slot of lower corrugated roller is not more than 2.6mm, able to reduce the stripe mark on single side corrugated cardboard.
* 该机器采用链条传动。
* The machine adopts chain transmission.
* 采用自动循环供胶,气动上胶及复位,具有缓冲效果。
* This machine adopts auto-cycle glue supply and pneumatic control glue supply and return, making it be characterized by buffering effect.
* 上胶辊表面经过特殊网纹刻花及镀铬处理。
* The glue roller surface is treated with special mesh nicking and chrome-plating.
* 上下瓦楞辊采用48CrMo优质合金钢制造,经过热处理,硬度在HRC58-62°表面经研磨,并进行镀铬处理。The upper and lower corrugated rollers are made of 48CrMo high quality alloy steel. After heat-treatment, the hardness can be up to HRC58-62.The surface is grinded and chrome plated.
* 楞型Flute profile: B flute.
主要部件参数Parameters of Main Parts
* 上、下瓦楞辊直径:Φ268mm
压力辊直径:Φ268mm,45号无缝钢管淬火处理
* Upper corrugated roller: Φ268mm Lower corrugated roller: Φ268mm
Pressure Roller: Φ268mm 45# seamless steel pipe, quenched
* 上胶辊直径:Φ210mm,45号无缝钢管,表面经特殊网纹刻花及镀铬处理
* Glue Roller: Φ210mm 45# seamless steel pipe, surface treated with special mesh nicking and chrome-plating
* 刮胶辊直径:Φ120mm,20号无缝钢管
* Glue Scraping Roller: Φ120mm 20# seamless steel pipe
* 预热辊直径:Φ268mm,济钢20G钢
* Pre-heating Roller: Φ2684mm 20GJigang steel
原材料和外购件Raw Materials and Bought-in Components
* 两侧墙板及底座材料:HT200,河北产
* Side Wallboards and base: casting HT200, place of origin: Hebei
* 传动部底座材料:槽钢焊接Base of transmission parts: welded by channel
* 电器类:施耐德Electric Appliances:Schneider
* 轴承:哈尔滨、洛阳或瓦房店产Bearings: produced in Harbin, Luoyang or Wafangdian.
加工定制否品牌腾瑞型号1600外形尺寸2500(mm)产品别名单面瓦楞机成品尺寸2500-2000-1800(mm)用途瓦楞机包装类型瓦楞纸板适用对象纸箱适用行业纸箱包装售后服务终身服务保固规格1600型吸附单面瓦楞机