深圳市蓝沃科技有限公司
主要经营：4G无线上网卡;4G路由器;4G无线路由器;4G随身WIFI;4G跨境漫游宝无线路由器;4G网络分享器;4G无线网卡;3G无线上网卡;3G无线网卡;WCDMA无线上网卡;4G无线上网卡;3G网卡;EVDO无线网卡;3G路由器;3G无线路由器;3G WIFI猫;4GWIFI猫，CPE，（中兴、华为、腾达品牌代理）
业务员(黄小姐:18028752854，QQ:1256319065，微信a917406396)请联系我们深圳市蓝沃科技有限公司，的质量，超竞争力的价格是您的选择。
支持HSDPA，最高上网速率达到7.2mbps，上行5.76mbps
网络频段：UMTS/HSDPA 2100MHz GSM/GPRS/EDGE 850/900/1800/1900MHz
本款3G路由，采用整板技术，直接插UIM芯片，无需再用WCDMA网卡，实现多人同时无线上网。
Before you want to use the device, setup your device as following:
1. Insert SIM;
2. Insert MicroSD Card;
3. Insert the battery;
4. Hold the Power/Connect button to power on;
5. Connect this device to your terminal device.
If you want to go to internet, manage LAN, connect your terminal device to3G HOSTPOTvia USB or Wi - Fi:
To quick setup your network, make sure you have logged in; the default password is
“password”. Click“Admin Setup”to quick set your device after log in . And you can do settings as following:
WPS
WPS (Wi-Fi Protected Setup) provide a more intuitive way of wireless configuration between your device and the wireless client. Please make sure that the Wi-Fi-enabled devices you want to connect support this function.
Enable WPS firstly before you want to use it.
If you select the “PIN” way, input the client’s PIN to the "Client PIN" frame.
If you select the “PBC” way, press the "WPS" button on wireless device in 120 seconds to establish WPS connection after you have pressed the "Wi-Fi/WPS" button on your device or clicked "Save".
Click "Save" to save your settings and start connecting when you select PIN or PBC way. You can also choose "No Connection" and click "Save" to save your settings without connecting.
4.2 Internet Settings
Make sure SIM has been inserted before you start internet settings.
Network Settings
In the part of Network settings, you can configure the network mode and network selection .
In “Network mode” setting, you should select the rule for registering the network. The
default selection is “Automatic”.
The default Network Selection mode is “Automatic”. When click “Manual”, a network
list will be activated, containing all searched networks. Having selected an available
network from the list,3G HOSTPOTwill register to the selected network.
Basic Settings
This part helps you configure System Language, Power-saving Mode, Change Password.
: Input the new password; confirm it andclick “Save” to finishthe settings
3G WiFi Router
HSPA+/HSPA/UMTS 2100Mhz
EDGE/GPRS/GSM 850/900/1800/1900M
HSDPA 7.2MB
HSUPA 5.76MB
