巴斯夫食品级TPU 1195A10

手机版链接：https://m.trustexporter.com/cz13008576.htm
巴斯夫食品级TPU 1195A10Elastollan? 1195A10热塑性聚氨酯弹性体BASF Corp. Thermoplastic Polyurethanes产品说明：Elastollan? 1195A is specifically formulated for extruded profile, sheet and film applications. It exhibits excellent abrasion resistance, toughness, transparency, very good low temperature flexibility, hydrolytic stability and fungus resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan? 1195A is rated UL-94 HB in vertical flame test for wall thicknesses of 0.75 and 3.0 mm. Elastollan? 1195A also conforms to the FDA food contact regulations as described in book 21, section 177.2600 for wet food contact applications. Elastollan? 1195A also has NSF Standard 61 "Water Contact Material" certification. Elastollan?1195A is supplied uncolored and in diced or pelletized form.Elastollan? 1195A10 物性表基本信息特性低温下的柔性抗菌性良好的撕裂强度良好耐磨损性韧性良好食品接触的合规性水解稳定机构评级FDA 21 CFR 177.2600NSF 61外观清晰/透明加工方法挤出注射成型物理性能额定值单位制测试方法比重1.14g/cm3ASTM D792熔流率（熔体流动速率）(210°C/10.0 kg)35 到 65g/10 minASTM D1238硬度额定值单位制测试方法肖氏硬度(邵氏 A)95ASTM D2240机械性能额定值单位制测试方法拉伸模量(注塑)51.7MPaASTM D412弯曲模量(注塑)52.4MPaASTM D790泰伯耐磨性55.0mgASTM D1044Abrasion - DIN25mm3DIN 53516热性能额定值单位制测试方法Softening Point - DMA89°C内部方法弹性体额定值单位制测试方法拉伸应力ASTM D412100应变17.2MPaASTM D412300%应变35.9MPaASTM D412抗张强度39.3MPaASTM D412伸长率(断裂)430%ASTM D412撕裂强度1140kN/mASTM D624压缩变形ASTM D395B23°C, 22 hr30%ASTM D395B70°C, 22 hr45%ASTM D395B热性能额定值单位制测试方法玻璃转化温度-28.0°C内部方法维卡软化温度127°CASTM D1525可燃性额定值测试方法UL 阻燃等级UL 940.750 mmHBUL 943.00 mmHBUL 94注射额定值单位制干燥温度110 到 120°C干燥时间2.0 到 3.0hr建议的大水分含量0.030%料筒后部温度190 到 220°C料筒中部温度190 到 220°C料筒前部温度190 到 220°C射嘴温度210 到 225°C挤出额定值单位制干燥温度110 到 120°C干燥时间2.0 到 3.0hr料筒1区温度170 到 210°C料筒3区温度170 到 210°C料筒5区温度170 到 210°C接头温度200 到 220°C口模温度195 到 215°C备注1 .C 模具巴斯夫食品级TPU 1195A10