美国杜邦EVA 470--丁二烯与丙烯酸丁酯高聚物是丁二烯聚合物中至关重要的产品,国外一般将其统称为EVA。但是在我国,大伙儿根据之中丙烯酸丁酯成份的不一样,将丁二烯与丙烯酸丁酯高聚物分为EVA环氧树脂胶、EVA塑料和EVA保湿乳液。丙烯酸丁酯成份小于40%的机器设备为EVA环氧树脂胶;丙烯酸丁酯成份40%~70%的产品很柔韧度;颇具可塑性特性,大伙儿将这一成份范围的EVA环氧树脂胶有时称作EVA塑料;丙烯酸丁酯成份在70%~95%范围内通常呈保湿乳液状况,称作EVA保湿乳液。EVA保湿乳液外观呈乳白色或微浅黄色。
DuPont EVA 470 - butadiene and butyl acrylate polymers are important products in butadiene polymers, which are generally referred to as EVA abroad. But in our country, according to the different components of butyl acrylate, the butadiene and butyl acrylate polymers are divided into EVA epoxy adhesive, EVA plastic and EVA moisturizing emulsion. Machinery and equipment with butyl acrylate content less than 40% are EVA epoxy resin adhesive; The product with 40% ~ 70% butyl acrylate is very flexible; It is quite plastic. Everyone sometimes refers to EVA epoxy resin adhesive in this composition range as EVA plastic; The butyl acrylate content is usually in the range of 70% to 95%, which is usually called moisturizing emulsion. It is called EVA moisturizing emulsion. The appearance of EVA moisturizing lotion is either milky or light yellow.
Elvax® 470 物性表
添加剂 | 抗氧化性 热稳定剂 |
特性 | 共聚物 抗氧化性 热稳定性 食品接触的合规性 |
用途 | 电线护套 复合 工业应用 混合 密封剂 粘合剂 |
机构评级 | FDA 21 CFR 177.1350(a)(1) |
形式 | 粒子 |
加工方法 | 吹塑成型 挤出 结构发泡成型 泡沫处理 片材挤出成型 压缩模塑 注射成型 |
比重 | 0.941 | g/cm³ | ASTM D792, ISO 1183 |
熔流率(熔体流动速率) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238, ISO 1133 |
醋酸乙烯含量 | 18.0 | wt% |
维卡软化温度 | 68.0 | °C | ASTM D1525, ISO 306 |
熔融峰值温度 | 89.0 | °C | ASTM D3418, ISO 3146 |
加工(熔体)温度 | < 230 | °C |
熔体温度 | < 230 | °C |