钢板腻子止水带_有限公司欢迎您!
1.钢板腻子止水带是我公司开发的一种新产品.它是一种由特种橡胶、防老剂等材料，经混炼、挤压后与镀锌钢板粘合而成的一种新型接缝防水、止水产品。能防止各种荷载下产生的弹性、变形及施工缝的温差变化，起到坚固密封。能有效的防止施工缝漏水，渗水，并对各种作用力起到缓冲作用。钢板腻子止水带为综合性能优良的高分子材料与镀锌板复合而成的止水产品。橡塑腻子主体材料为耐老化性能优良的橡塑材料，具有特强的自粘性；夏季高温不流淌。冬季低温不发脆；并具有优异的耐水、耐酸碱和耐老化性能；使用寿命长，产品本身无毒，环境良好。为了承受一定的弯曲和压力。中间来有0.4或0.6mm的钢板。钢板腻子止水带对建筑缝之间提供可靠的防水、防渗功能。钢板腻子止水带系列产品包括各种规格型号的产品，并可根据用户要求，生产各种型号的钢板腻子止水带，满足工程上的实际需要。
1. steel putty sealing strip is a new product developed by our company. It is a special rubber and antioxidant as material, through mixing, extrusion and galvanized steel plate bonding is a new type of waterproofing, sealing products. It can prevent the elasticity, deformation and the temperature difference of the construction joints under various loads, and play a strong sealing. It can effectively prevent the construction joints from leaking, leaking water, and buffering the various forces. The steel plate putty water stop belt is a kind of waterproof product compounded with high performance polymer material and galvanized sheet. The main material of rubber and plastic putty is the rubber and plastic material with excellent aging resistance, it has strong self adhesion, and the high temperature does not flow in summer. Low temperature and no brittleness in winter, and has excellent water resistance, acid and alkali resistance and aging resistance, long service life, non-toxic products, good environment. In order to withstand certain bending and pressure. There are 0.4 or 0.6mm steel plates in the center. The steel plate putty waterproof belt provides the reliable waterproof and the seepage prevention function to the construction joint. The series products of steel plate putty waterproof belt include various specifications and types of products, and can produce various types of steel putty waterproof belt according to the user's requirements, to meet the actual needs of the project.
2.钢板腻子止水带施工与安装注意事项：
Precautions for construction and installation of 2. steel plate putty water stop belt:
采用钢筋或模板对钢板腻子止水带进行定位。施工缝间隙止水带一般一半先浇注于砼中，另一半在二期施工中埋入砼内。因此，钢板腻子止水带固定方法必须可靠，避免发生移位。二期施工前，另一半止水带应注意保护。浇注混凝土。在浇注过程中应注意捣浇压力和方法，以避免砼中尖角石子和锐利的钢筋刺破钢板腻子止水带。
钢板腻子止水带_有限公司欢迎您!
钢板腻子止水带_有限公司欢迎您!
Use steel bar or template to locate steel plate putty water stop belt. Half of the gap in the construction gap is first poured into the concrete, and the other half is embedded in the concrete in the two stage construction. Therefore, the fixing method of steel plate putty waterproof belt must be reliable and avoid displacement. Before the two phase construction, the other half of the water stop belt should pay attention to protection. Cast concrete. The pouring pressure and method should be paid attention to during the pouring process so as to avoid the sharp corner stone and sharp steel bar piercing the steel plate putty water stop belt.
3.钢板腻子止水带保存与运输注意事项
Precautions for storage and transportation of 3. steel plate putty water stop belt
（1）钢板腻子止水带不得露天长期存放。
(1) steel plate putty sealing strip shall not be stored for a long time in the open air.
（2）不得与油漆等污染性强的化学物接触。
(2) shall not contact with paint and other polluting chemicals.
（3）在运输过程中，防止机械、钢筋等损坏钢板腻子止水带。
(3) in the process of transportation, to prevent mechanical, steel and other damage to steel plate putty waterproof belt.
（4）雨天不宜施工，施工温度宜在15℃-35℃之间。
(4) the construction should not be suitable for rainy days, and the construction temperature should be between 15 and -35 degrees centigrade.
钢板腻子止水带_有限公司欢迎您!