全自动真空叶片灌肠机 香肠腊肠烤肠生产机械设备 红肠生产线

发布日期 :2019-04-11 09:34 编号:4243423 发布IP:14.212.242.23
供货厂家
佛山市奥楷机械科技有限公司  
品牌
奥楷
电压
380
功率
6.5
产量
3.5T/H
报价
90000.00元/台
起订
1 台
库存
1000 台
发货时间
3 天内
联系人
肖炳东(先生)网络总监
电话
15916057763
手机
15916057763
询价邮件
3414863135@qq.com
区域
南海灌肠机
地址
广东省佛山市南海区狮山镇罗村联星村兴旺大道3号
在线咨询:
点击这里给我发消息
让卖家联系我
详细介绍
手机版链接:https://m.trustexporter.com/cz4243423.htm

全自动真空叶片灌肠机 香肠腊肠烤肠生产机械设备 红肠生产线

工作模式选择:

模式0 点动模式,按启动按钮或触动膝碰开关就启动,松开马上停止。

模式1 有扭结时,按一次启动按钮或触发一次膝碰开关,就输出一个扭结体积并且扭结一次。

    无扭结时,按一次按钮或触发一次膝碰开关,灌肠启动,再按一次或再触发一次,灌肠停止。

模式2有扭结时,按一次启动按钮或触发一次膝碰开关,就输出一条带扭结的肠。

    无扭结时,按一次按钮或触发一次膝碰开关,灌一条肠启动,再按一次或再触发一次,灌肠暂停。再次就启动灌肠,直到这一条肠灌完。







维护与保养:

开机前,叶片和转子必须涂上食用油进行润滑,否则会损坏泵体!!!每天用完机器后要进行保养,如果长期不使用,停止使用前要进行一次保养,并晾干水份,然后上食品级润滑油。每隔两星期再进行一次保养加油。

清洁机器不要用高压水枪冲洗。轴承要每三天加黄油。每星期检查一次真空泵油液位和油品质,每两个月更换一次真空泵油。

每个月在关掉外部总电源后,打开外门,清洁内部卫生,并把所有的螺丝紧固一次。


Automatic vacuum blade enema machine sausage sausage sausage production machinery and equipment red sausage production line
Working mode selection:
Mode 0 jog mode, press the start button or touch the knee touch switch to start, release immediately stop.
When the mode 1 has a kink, press the start button once or trigger a knee switch to output a kink volume and kink once.
    No kink, press the button once or trigger a knee touch switch, enema start, then press once or trigger again, enema stop.
Mode 2 has a kink, press the start button once or trigger a knee touch switch, the output of a kinked intestinal.
    No kink, press the button or trigger a knee touch switch, irrigation a bowel start, and then once again or trigger once again, enema pause. Start the enema again until the bowel is finished.

maintenance:
Before the boot, the blades and the rotor must be coated with edible oil for lubrication, otherwise it will damage the pump! The The After the use of the machine every day to carry out maintenance, if not long-term use, to stop before the use of a maintenance, and dry water, and then on the food grade lubricants. Every two weeks and then a maintenance refueling.
Do not rinse with a high pressure water gun. Bear the grease every three days. Check the vacuum pump oil level and oil quality once a week and replace the vacuum pump oil every two months.
After turning off the external mains power each month, open the outer door, clean the internal hygiene, and tighten all the screws.




我们的其他产品
相关全自动真空产品